Daily Care Instructions

Cloth part

Brush with a soft brush or tap the surface softly and vacuum to remove dust to avoid damaging the cloth.
When it gets dirty after extended period of time, wipe with a well wrung soft cloth moistened with thin neutral detergent. Wipe clean with a damp cloth. Be sure to wipe detergent completely and wipe again with a dry cloth to dry it.
When using alkaline electrolyzed water to remove stains, spray directly on the stain and brush with a soft brush taking care not to damage the cloth. Then, wipe the moisture and stain to remove and wait for the cloth to dry.
When it gets an oily stain, dab and remove it by using a dedicated stain remover immediately. Then wipe with a soft cloth dampened with water, followed by a dry cloth to dry. Stains may be permanent depending on the material.

Please be careful

Do not leave the product with moisture remaining on it. Do not clean the product with organic solvents such as thinner or benzene, or with a cloth that contains chemicals. Be aware that once discoloration or deterioration happens, it cannot be reverted to its original state.
Do not use hypochlorous acid water. Failure may cause the color or texture of the surface to be deteriorated.

Leather part

Wipe off with a dry soft clean cloth.
If you spill any liquid, immediately wipe it with a dry cloth. If the stain does not come off, soak a cloth in warm water, wring it out tightly, and then use it to wipe the area.

Vinyl leather (alcohol-resistant, sodium hypochlorite-resistant) part

Soak a cloth in water, wring it out thoroughly, wipe the surface with it, then follow up with a dry cloth to dry it.
If dirt is noticed, immediately wipe it off with a well wrung soft cloth moistened with thin neutral detergent. Be sure to remove detergent completely with a damp cloth and wipe again with a dry cloth to dry it.
After disinfecting with alcohol or a sodium hypochlorite solution, wipe off any remaining disinfectant with a cloth moistened with water, then wipe with a dry cloth to ensure proper drying.

Please be careful

For the vinyl leather part, do not use an organic solvent such as thinner or benzene, hypochlorous acid water, a chemical cloth, or a shoe cleaner. If the color or texture of the vinyl leather part deteriorates, it cannot be restored to its original state.
Do not leave liquid disinfectant residue on the surface. Doing so could result in discoloration and deformation
Disinfecting more frequently or at higher concentrations than necessary may result in discoloration, deformation, or accelerated undesired stiffness.
Be sure to abide by the procedure and amount specified for the disinfectant you are using.

Vinyl leather part

Soak a cloth in water, wring it out thoroughly, wipe the surface with it, then follow up with a dry cloth to dry it.
If dirt is noticed, immediately wipe it off with a well wrung soft cloth moistened with thin neutral detergent. Be sure to remove detergent completely with a damp cloth and wipe again with a dry cloth to dry it.

Please be careful

For the vinyl leather part, do not use an organic solvent such as thinner or benzene, alcohol, sodium hypochlorite, hypochlorous acid water, a chemical cloth, or a shoe cleaner. If the color or texture of the vinyl leather part deteriorates, it cannot be restored to its original state.

Aluminum/Steel Parts

Glass part

Natural wood part

Gently wipe with a clean, dry, and soft cloth in the direction of the grain.
When it gets exceptionally dirty, wipe off the dirt with a well wrung moistened soft cloth, then wipe again with a dry cloth to dry it.

Please be careful

Do not use the following items, as they will damage the coating. Thinner, benzene, alcohol, lacquer, oil, vinegar, boiling water, polishing powder, etc.
Do not frequently wipe with a moist cloth as this may result in cracks in the wood portion.

Resin Part

Wipe with a well wrung soft cloth moistened.
If dirt is noticeable, wipe it off with a well wrung soft cloth moistened with thin neutral detergent. Be sure to remove detergent completely with a damp cloth and wipe again with a dry cloth to dry it.

Please be careful

Do not rub hard. Failure will cause flashing to change the viewed color. If dirt cannot be removed, wipe it off with a soft cloth impregnated with alcohol for hand disinfection.
Do not use any alkaline or acidic cleaning agents.
When cleaning the table surface, avoid letting cleaning agents seep into the gaps between the decorative laminate (such as melamine) and edging.

Whiteboard Part

If it is difficult to clean the surface, wipe it with a damp cloth that has been wrung out tightly. Afterwards, dry wipe with a soft, fine-grained cloth.

Please be careful

Please avoid cleaning with detergent etc. as it may cause dirt to adhere. Also, never wipe with organic solvents such as benzine or thinners.
Do not use polishing powder or scrubbing brush to clean, as it will damage the surface finish.